DRC-200--

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
mototech
Posts: 11
Joined: Thu Apr 10, 2003 8:45 pm
Location: Kentucky

DRC-200--

Post by mototech » Sun Mar 07, 2004 6:45 pm

Hello Group ! Looking for software and service manual for DRC-200 DESKTOP REPEATER...ANY HELP IS APPRECIATED, STUFF TO EXCHANGE..

User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso » Mon Mar 15, 2004 1:56 pm

The manual is on http://www.radtek.ws
The software if not already in the download area will be there soon.
:beer:

thor
Posts: 10
Joined: Thu Jul 22, 2004 12:12 pm

Post by thor » Sun Dec 12, 2004 5:17 pm

This site dose not work any other sorce for this software and or service manual
Last edited by thor on Sun Dec 12, 2004 10:51 pm, edited 1 time in total.

User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso » Sun Dec 12, 2004 5:29 pm

The site will be back on line within the next few weeks without fail.

thor
Posts: 10
Joined: Thu Jul 22, 2004 12:12 pm

Post by thor » Sun Dec 12, 2004 5:34 pm

ok will check back then.

Thanks

thor
Posts: 10
Joined: Thu Jul 22, 2004 12:12 pm

Post by thor » Sun Dec 12, 2004 10:52 pm

Also dose this site have info on building a programming cable for this repeater?
Last edited by thor on Sun Dec 12, 2004 11:00 pm, edited 1 time in total.

User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso » Sun Dec 12, 2004 11:00 pm

No, but the cable can be purchased inexpensively enough through Relm Communications. or New London Technologies BTW this repeater was built for GE by Relm

thor
Posts: 10
Joined: Thu Jul 22, 2004 12:12 pm

Post by thor » Mon Dec 13, 2004 1:31 pm

Ok here is what i found out for any one needed a program cable.

"Contact the sales department at (800) 821-2900 and ask for pricing on the PCKIT030. This is a kit with hardware and software necessary for programming the older Relm model repeaters and mobiles. The cable is not available separately." (email back from Relm Service).

As the email says you can not buy the cable separately and they want $241.66 for the kit.

I have not heard back form New London Technologies yet maybe thay will sell just the cable at a good price. Also from the email it looks like the DRC-200 uses the same interface (I think it is an IA4500) as some older mobiles most likely the ones with the six conductor modular cable.

So if some one has a schematic for this interface that would be nice.

w6krp
Posts: 2
Joined: Tue Jun 16, 2015 12:51 pm

Re: DRC-200-- COR signal

Post by w6krp » Sun Jun 28, 2015 2:12 pm

has anyone been able to locate a COR/COS signal either active high or active low that does not kill the audio ?

and pin 15 on the DB15 is a active low but it kills the audio

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests