MODEL STRING DECODE REQUESTS ONLY

[TonyAcabono]

Thanks boss, hopefully I can pick it up cheap and it works, but I guess if it sh--s then I am out of luck.

242-5112-610-G02

5100 NOT SL/Ascend
VHF
NON IS Model II
VHF Wideband Antenna (136-174)
Non IS Battery
Black Housing
Analog/P25 Conventional
P25 Trunking
SmartNet
SmartZone
Star (Omnilink)
Digital SN/SZ
P25 DES-OFB
AES
Conv OTAR
P25 Trunking OTAR
512 Channels

This is a series 2 legacy radio that is no longer supported by EFJ

I.S.

[TonyAcabono]

242-5216-660SL4

preemptive thank you

[Intrinsically Safe]

242-5216-660SL4

51SL
VHF
IS-Model II
VHF Wideband antenna
IS Battery
Black Housing
Analog
P25 Conv
SmartNet
SmartZone
STAR (Omnilink)
Digital SN/SZ
512 Channels
Single Key DES/DES-OFB
MDC-1200

Series 4 (X Platform) radio
I hear it is nearing the end of its support cycle(firmware) since the series 6 radios are out (ES Platform)

I.S.

[sparkdo2xg]

MODEL STRING DECODE please and what software do i need to program it

242-8160 avenger sk-hm83


thanks in advance

[Hubert Chapman]

For #'s

242-9653

242-9883-503

Thanks
Hubert

[Intrinsically Safe]

9653 is an LTR 800 Mhz Viking radio. I would need the last 3 digits to tell you more.

The 9883-503 is a high power(35w) 800Mhz Smartnet and/or Smartzone radio.

Both of these are no longer supported.

I.S.

[125]

I guess I will ask as well for a 242-5117-660GS4 Thanks.

[Intrinsically Safe]

242-5117-660GS4

5100 (not SL/Ascend)
VHF
Model III I.S.
Wideband VHF Antenna
I.S. Battery
Black Housing
Analog/Dig Conv
P25 Trunking
SmartNet/SmartZone
STAR(Omnilink)
Digital SN/SZ
DES-OFB
Keypad Programming (FPP)
512 TG
AES

Series 4 radio with limited support. I don't think they are developing any more firmware for this series but will support HW as parts are available.

I.S

I.S

[125]

Thank you.

[redbeard]

Picked up a mobile at Dayton this weekend. Cannot find much info on the net other than high tier Intruder UHF LTR-Net and Multi-Net along with conventional. This is my first EFJ so any help would be appreciated pointing me in the right direction on how to get started. I powered it up and nothing lights up but the display says E.F.J. V201 and it does nothing else. Is it just blank? Is there a test mode I can use to validate TX/RX until I figure out what I need to program it? PM only please since this is decode request only. I will post separate help thread in main area for public responses. (better for helping everyone later who are using search)

Model for feature decode is: 242-9843-232

Thanks.

[willbartlett]

Hi All.

I have 2 legacy 5100 VHF. 242-5113-310-gf.

I dug through the archives and these were described as legacy radios, which is fine as they weren't that expensive.

I wanted to know if the legacy controllers supported DES in the DSP? reading the options in 1.24.00 and 1.31.1 shows identical responses, DES in one and nothing in the other. Is this possible or is this a file format conflict?

There doesn't appear to be a UCM connector or a SEM on either board. Rev number on the boards is 100.07.

What firmware can these be lifted to and will the rev available work with 1.24.0 or 1.31.1?

Thanks, Will

[Intrinsically Safe]

Will,

Those are the series 1 radios. The encryption was software based and will support DES/DES-OFB, but NOT AES. There are no connectors to support the addition of the MOT UCM (that was the series 2 and 3). These radios are not FIPS certified if it means anything to you.
The last release for these is 1.18.15 and requires PCC 1.28.0.8

I.S.

[Medic511]

I would like to know the details of the following model number:

242-5318-201AAAB4

If it helps, the s/n is:

5318H5005T38599

I know this is a remote mount, VHF. I would particularly like to know if it is narrow band (12.5 kHz) capable.

Many thanks.

de KA7GZH

[flat4turbo]

I would like to know the details of the following model number:

242-5318-201AAAB4

If it helps, the s/n is:

5318H5005T38599

I know this is a remote mount, VHF. I would particularly like to know if it is narrow band (12.5 kHz) capable.

Many thanks.

de KA7GZH

5300 Series (not SL) Mobile
512 Channels
50w VHF (136-174) Remote Mount Drawer
Remote RS-5300 Six-Button Control Head with Mtg Bracket
P25 Digital & Analog Conventional
No Trunking
No OTAR
No Encryption

Not the full level of detail provided by other, more capable people here. [I left room for your thunder to chyme in any time]

** All 5300 radios can do 12.5khz spacing.

-f4t

[Intrinsically Safe]

Wow. I guess I am out of job.

Good work F4T.

I.S.